Future of Carbon Fibre- A Short Review

Authors

  • Nurul Farhana Roszaini
  • Siti Amira Othman UTHM

Keywords:

Carbon fiber, Electronics, Phone casing, PAN, Resin

Abstract

This paper will discuss the previous studies related to carbon fibre. Carbon fiber is five times stronger than steel but it is still lighter than aluminum. Low weight reduces friction, and this is good for the consumers. Carbon fiber provides several other advantages, including corrosion resistance which is caused by carbon-carbon bonds, and it is naturally resistant to oxidation, moisture and heat stability, and high energy absorption. Carbon fiber is also resistant to corrosive situations. The detail about phone case applications, carbon fiber, the materials of carbon fiber, resin used and heat treatment will be reviewed. The topics  will be discussed deeply in this paper and more information will be stated in it

References

Arthur Hill. (2020). Bumper Cases and Carbon Fiber Cases: Everything To Know. Retrieved from https://mobileshark.co.uk/blog/bumper-cases-and- carbon-fibre-cases/
Chung, D.L. (1994). Carbon Fiber Composites; Butterworth-Heinemann: Boston, MA, USA. pp. 3–65.
Claire. (2016). Carbon Fiber Phone Cases:”Just Say No”. Retrieved from https://global.ipitaka.com/blogs/news/carbon-fiber-phone-cases-just-say-no?
Dai ZS, Zhang BY, Shi FH, Li M, Zhang ZG, Gu YZ. (2012). Chemical interaction between carbon fibers and surface sizing. Journal of Applied Polymer Science 124(3):2127-2132.
Diefendorf R.J., Tokarsky E. (1975). High-performance carbon fibers. Polym. Eng. Sci. 15:150–159.
Donnet, J.B. & Bansal, R.C. (1990). Carbon Fibers, 2nd ed.; Marcel Dekker: New York, NY, USA. pp. 1–145.
Feih S, Mouritz AP. (2012). Tensile properties of carbon fibers and carbon fiber- polymer composites in fire. Composites Part a-Applied Science and Manufacturing 43(5):765-772.
Lee, S., Kim, J. , Ku, B. , Kim, J. and Joh, H. (2012) Structural Evolution of Polyacrylonitrile Fibers in Stabilization and Carbonization. Advances in Chemical Engineering and Science, 2, 275-282.
Pooja Bhatt & Alka Goe. (2017). Carbon Fibers: Production, Properties and Potential Use, Retrieved from https://www.materialsciencejournal.org/vol14no1/carbon- fibres-production-properties-and-potential-use/
Roberts, T. (2006). The Carbon Fiber Industry: Global Strategic Market Evaluation 2006–2010; Materials Technology Publications: Watford, UK. 10, 93–177, 237.
Rock West. (2020). Do Carbon Fiber Phone Cases Really Mess With Your Reception, Retrieved from https://www.rockwestcomposites.com/blog/do-carbon- fiber-phone-cases-really-mess-with-your-reception/
Xiaosong Huang. (2009). Fabrications and Properties of Carbon Fiber, Materials (Basel). 2(4): 2369–2403.
Zafar A, Bertocco F, Schjodt-Thomsen J, Rauhe JC. (2012). Investigation of the long term effects of moisture on carbon fiber and epoxy matrix composites. Composites Science and Technology. 72(6):656-666.

Downloads

Published

2024-06-25

Issue

Vol. 8 No. 2 (2024): Integrated Innovation for Sustainable Futures

Section

Articles in English

License

All materials contained within this journal are protected by Intellectual Property Corporation of Malaysia, Copyright Act 1987 and may not be reproduced, distributed, transmitted, displayed, published, or
broadcast without the prior, express written permission of Centre for Graduate Studies, Universiti Selangor, Malaysia. You may not alter or remove any copyright or other notice from copies of this content.